Project · Home · Niskayuna
Fixing a roof-to-wall leak beside a stucco chimney in Niskayuna
The owners had bought this Niskayuna house a year earlier and found leaks every time it rained hard. The cause was where the roof meets the wall beside the chimney: there was no kick-out flashing. In September 2026 we fixed the flashing first, then the stucco.

At a glance
- Client
- Private homeowner
- Location
- Niskayuna
- Completed
- September 2026
- Our role
- Prime contractor
- Scope
- Traced a heavy-rain leak to missing kick-out flashing, re-flashed the roof-to-wall joint, rebuilt the stucco and refinished the wall.
- Status
- Complete
- The Dom Construction Group LLC
The problem at the Niskayuna chimney
Every heavy rain brought water in near the chimney. A leak that comes and goes with the weather is hard to trace from inside, because the stain rarely sits right under the place where the water gets in.
What we found at the Niskayuna chimney
The leak started at the roof-to-wall connection beside the chimney. That joint had no kick-out flashing: the small bent piece of metal at the bottom of a roof-to-wall joint that throws roof water out, away from the wall. Without it, water running down the roof edge was steered into the wall behind the stucco, and in a heavy rain that is a lot of water.
Once the wall was opened, a small area of damaged EIFS turned up as well. It was replaced under a change order before the wall was closed up.
What we did at the Niskayuna chimney
- Removed the damaged stucco at the roof-to-wall connection beside the chimney.
- Installed new roof-to-wall flashing and a kick-out, with drip edge.
- Replaced the small area of damaged EIFS found once the wall was opened.
- Rebuilt the stucco over the new flashing.
- Put a fresh finish coat over the whole wall area, not just the patch, so the repair doesn't show.
Flashing first, stucco second: patching the stucco without fixing the flashing would only have hidden the leak until the next storm.
The result at the Niskayuna chimney
The work was completed in September 2026, with the new flashing in place and the wall finished as one surface.
Roof-to-wall joints are one of the usual places water gets behind stucco and EIFS. Our kick-out flashing page explains what a kick-out does and where it goes, and stucco repair covers chimneys and other cracked or damaged stucco.
More on roof-to-wall leaks and stucco
- Roof-to-wall leaks and kick-out flashing
Why the small piece of metal at the roof edge matters on stucco and EIFS.
- Stucco repair
Cracked, loose or stained stucco, including chimneys.
- All projects
More EIFS and stucco jobs, by town and month.
- More on this job at The Dom Construction Group
The parent company's summary of the same job.
Same problem? Text a photo.
Leaks that only show up in heavy rain often start at a roof-to-wall joint. Send a photo of the outside wall and one of the stain inside.